Setting Up A Secure Wireless Network; Configuring The Wireless Network Settings - ZyXEL Communications VMG1312-B Series User Manual

You should see a summary of your new DSL connection setup in the Broadband screen as follows.
8
Try to connect to a website to see if you have correctly set up your Internet connection. Be sure to
contact your service provider for any information you need to configure the WAN screens.

4.3 Setting Up a Secure Wireless Network

Thomas wants to set up a wireless network so that he can use his notebook to access the Internet.
In this wireless network, the Device serves as an access point (AP), and the notebook is the
wireless client. The wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the Device. Then he can set up a wireless
network using WPS

4.3.1 Configuring the Wireless Network Settings

This example uses the following parameters to set up a wireless network.
SSID
Security Mode
Pre-Shared Key
802.11 Mode
Click Network Setting > Wireless to open the General screen. Select More Secure as the
1
security level and WPA2-PSK as the security mode. Configure the screen using the provided
parameters (see
Chapter 4 Tutorials
(Section 4.3.2 on page
Example
WPA2-PSK
DoNotStealMyWirelessNetwork
802.11b/g/n Mixed
page 36). Click Apply.
VMG1312-B Series User's Guide
37) or manual configuration
36
(Section 4.3.3 on page 41).