ZyXEL Communications VMG1312-B Series User Manual page 237

Figure 127 Create Certificate Request
The following table describes the labels in this screen.
Table 96 Create Certificate Request
LABEL DESCRIPTION
Certificate Type up to 63 ASCII characters (not including spaces) to identify this certificate.
Name
Common Name Select Auto to have the Device configure this field automatically. Or select Customize to
enter it manually.
Type the IP address (in dotted decimal notation), domain name or e-mail address in the field
provided. The domain name or e-mail address can be up to 63 ASCII characters. The
domain name or e-mail address is for identification purposes only and can be any string.
Organization Type up to 63 characters to identify the company or group to which the certificate owner
Name belongs. You may use any character, including spaces, but the Device drops trailing spaces.
State/Province Type up to 32 characters to identify the state or province where the certificate owner is
Name located. You may use any character, including spaces, but the Device drops trailing spaces.
Country/Region Select a country to identify the nation where the certificate owner is located.
Name
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
After you click Apply, the following screen displays to notify you that you need to get the certificate
request signed by a Certificate Authority. If you already have, click Load_Signed to import the
signed certificate into the Device. Otherwise click Back to return to the Local Certificates screen.
Figure 128 Certificate Request Created
Chapter 22 Certificates
VMG1312-B Series User's Guide
237