Add/Edit Port Forwarding - ZyXEL Communications XMG3512-B10A User Manual

11.2.1 Add/ Edit Po rt Fo rwa rding
Click
Add Ne w Rule
the following screen.
Port Forwarding: Add/Edit
Fig ure 78
The following table describes the labels in this screen.
Table 56 Port Forwarding: Add/Edit
L ABEL
Active
Service Name
WAN Interface
Start Port
Chapter 11 Network Address Translation (NAT)
in the
Po rt Fo rwa rding
DESC RIPT IO N
Select to enable or disable the rule.
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
Select the WAN interface through which the service is forwarded.
You must have already configured a WAN connection with NAT enabled.
Enter the original destination port for the packets.
To forward only one port, enter the port number again in the
To forward a series of ports, enter the start port number here and the end port number in the
field.
Po rt
XMG3512-B10A User's Guide
screen or click the icon next to an existing rule to open
Edit
152
field.
End Po rt
End