Add/Edit Port Forwarding - ZyXEL Communications SBG5500-A User Manual

Table 42 Configuration > NAT > Port Forwarding (continued)
LABEL
Ending Port
LAN IP Address
Translation Start
Port
Translation End
Port

8.2.1 Add/Edit Port Forwarding

Click Add in the Port Forwarding screen or select an existing rule and click Edit to open the following
screen.
Figure 96 Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 43 Port Forwarding: Add/Edit
LABEL
Enable
Add Exception
to Firewall
Service Name
Protocol
WAN Interface
From WAN Site
Chapter 8 Network Address Translation (NAT)
DESCRIPTION
This is the last external port number that identifies a service.
This is the service's internal IP address.
This is the first internal port number that identifies a service.
This is the last internal port number that identifies a service.
DESCRIPTION
Clear the check box to inactivate the rule. Select the check box to activate it.
Select this option to create an incoming filter rule in the Firewall to allow the packets.
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
Select the protocol supported by this virtual server. Choices are TCP, UDP, or TCP/UDP.
Select the WAN interface through which the service is forwarded.
You must have already configured a WAN connection with NAT enabled.
SBG5500 Series User's Guide
125