Dual-Home For Multiple Satellites With Single Physical Icls On Both Hosts And Satellites; Dual Home Configuration For Sat1; Dual Home Configuration For Sat2 - Cisco ASR 9000 Series System Configuration Manual

Dual-Home for Multiple Satellites with Single Physical ICLs on Both Hosts and Satellites

remote-ports <interface-id>
!
!
nv
satellite <id>
type <type>
device-name <name>
redundancy
host-priority <0-255>
!
serial-number <serial-number>
!
Dual-Home for Multiple Satellites with Single Physical ICLs on Both Hosts
and Satellites

Dual Home Configuration for SAT1

When you use either a manual IP address or an IPv4 unnumbered loopback address for the ICL, the IP
Note
address must be different on both the hosts.
Host 1:
interface TenGigE0/1/1/23.100
ipv4 point-to-point
ipv4 address 100.100.1.101 255.255.255.0
encapsulation dot1q 100
nv
satellite-fabric-link satellite 100
redundancy
!
remote-ports GigabitEthernet 0/0/0-35
!
!
!
Host 2:
interface TenGigE0/1/1/2.100
ipv4 point-to-point
ipv4 address 100.100.1.102 255.255.255.0
encapsulation dot1q 120
nv
satellite-fabric-link satellite 100
redundancy
!
remote-ports GigabitEthernet 0/0/0-35

Dual Home Configuration for SAT2

Host 1:
Host1:
interface TenGigE0/1/1/23.200
ipv4 point-to-point
ipv4 address 100.100.1.101 255.255.255.0
encapsulation dot1ad 100
nv
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
68
iccp-group 1
iccp-group 1
Configuring the Satellite Network Virtualization (nV) System