Configuring the Satellite Network Virtualization (nV) System
Remote version: Compatible (latest version)
Configured satellite fabric links:
##Standby host:
RP/0/RSP1/CPU0:Router# show nv satellite status satellite 200
Satellite 200
-------------
Status: Connected (Stable)
Redundancy: Standby (Group: 10)
Type: asr9000v
MAC address: 8478.ac01.d2d8
IPv4 address: 192.1.1.200 (VRF: default)
Serial Number: CAT1708U0LV
Remote version: Compatible (latest version)
Configured satellite fabric links:
Simple Ring Topology
RP/0/RSP1/CPU0:Router# show nv satellite topology interface tenGigE 0/3/0/6
TenGigE0/3/0/6
--------------
Redundancy-Group: 10
Discovery status: Running
Satellites:
Monitoring the Satellite Protocol Status
To check the status of the satellite discovery protocol, use the show nv satellite protocol discovery command.
RP/0/RSP0/CPU0:router# show nv satellite protocol discovery brief
ROMMON: 126.0 (Latest)
FPGA: 1.13 (Latest)
IOS: 322.6 (Latest)
TenGigE0/0/0/1
--------------
Status: Satellite Ready
Remote ports: GigabitEthernet0/0/0-10
ROMMON: 126.0 (Latest)
FPGA: 1.13 (Latest)
IOS: 322.6 (Latest)
TenGigE0/3/0/6
--------------
Status: Satellite Ready
Remote ports: GigabitEthernet0/0/0-10
Satellite 100 (BVID 2002)
-------------------------
Received Serial Number: CAT1547B30S
MAC address: 4055.3957.5f50
Satellite fabric links:
TenGE/0/0/0 (Remote ID: 0x1):
Host (TenGigE0/3/0/6)
TenGE/0/0/3 (Remote ID: 0x4):
Sat 200 (TenGE/0/0/3 (Remote ID: 0x4))
Satellite 200 (BVID 2003)
-------------------------
Received Serial Number: CAT1708U0LV
MAC address: 8478.ac01.d2d8
Satellite fabric links:
TenGE/0/0/3 (Remote ID: 0x4):
Sat 100 (TenGE/0/0/3 (Remote ID: 0x4))
TenGE/0/0/0 (Remote ID: 0x1):
Remote port not yet identified
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
Monitoring the Satellite Protocol Status
59