Channelized Line Cards; Channelized Line Card (Clc2) With Single-Mode Interface; Channelized Line Cards (Clc2) With Multi-Mode Interface - Cisco ASR 5000 Series Installation Manual

Technical Specifications

Channelized Line Cards

Channelized Line Card (CLC2) with Single-Mode Interface

The optical SFP interface on the 4-port CLC2 with the single-mode interface has four pairs of connectors that accept
SFP transceivers.
Table 104. Single-Mode Fiber Transmit and Receive Levels

Channelized Line Cards (CLC2) with Multi-Mode Interface

The fiber SFP interface on the 4-port CLC2 with the multi-mode interface has four pairs of connectors that receive SFP
transceivers.
Table 105. Multi-Mode Fiber Transmit and Receive Levels
Signal Level
Max TX: -8 dBm
Min TX: -15 dBm
Max RX: -8 dBm (saturation average power)
Min RX: -28 (max.) dBm (sensitivity average power)
Signal Level
Max TX: -14 dBm
Min TX: -19 dBm
Max RX: -12 dBm (saturation average power)
Min RX: -30 (max.) dBm (sensitivity average power)
Interface Specifications ▀
ASR 5000 Installation Guide ▄
275