Cisco ASR 9000 Series System Configuration Manual page 60

Configuration Examples of SyncE on ASR9000 Hosts
Configuring the ASR 9000v as a satellite in Host B:
nv
satellite 100
type asr9000v
ipv4 address 100.0.0.3
description sat100
serial-number CAT1708U0NA
!
!
Configuring the fabric interface for the satellite on Host A:
interface Loopback100
ipv4 address 100.0.0.1 255.255.255.0
!
interface Bundle-Ether100
ipv4 point-to-point
ipv4 unnumbered Loopback100
nv
satellite-fabric-link satellite 100
redundancy
iccp-group 1
!
remote-ports GigabitEthernet 0/0/0-43
!
!
!
interface TenGigE0/0/0/0
bundle id 100 mode on
!
Configuring the fabric interface for the satellite on Host B:
interface Loopback100
ipv4 address 100.0.0.2 255.255.255.0
!
interface TenGigE0/0/0/0
ipv4 point-to-point
ipv4 unnumbered Loopback100
nv
satellite-fabric-link satellite 100
redundancy
iccp-group 1
!
remote-ports GigabitEthernet 0/0/0-43
!
!
!
Configuring ICCP Redundancy and MPLS LDP on Host A:
redundancy
iccp
group 1
member
neighbor 70.0.0.2
!
!
!
!
mpls ldp
router-id 70.0.0.1
address-family ipv4
discovery targeted-hello accept
!
interface TenGigE0/0/0/1
!
!
Configuring ICCP Redundancy and MPLS LDP on Host B:
redundancy
iccp
group 1
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
50
Configuring the Satellite Network Virtualization (nV) System