Configuring The Satellite Nv Optical Shelf System; Prerequisites Of Nv Optical System - Cisco ASR 9000 Series System Configuration Manual

Configuring the Satellite nV Optical Shelf System

This chapter describes the configuration of the Satellite Network Virtualization (Satellite nV) Optical Shelf
system on the Cisco ASR 9000 Series Aggregation Services Routers.
•
•
•
•
•
•

Prerequisites of nV Optical System

The following are the requirements and prerequisites for nV optical shelf system configuration:
• Ensure the version of software on the satellite is VxWorks 10.00.01 (10.01).
• Factory reset the satellite system.
• Ensure the DWDM software package is installed on the satellite. For example, the packages to be installed
• Configure the satellite directly using Cisco Transport Controller (CTC) interface with the connection
• For the optical shelf system to collect data for performance monitoring, configure Network Time Protocol
Prerequisites of nV Optical System, page 113
Overview of the Satellite nV Optical Shelf System, page 114
Configuring the Satellite Optical Shelf Identity and Connection Parameters, page 115
Provisioning an Optical Application, page 117
Configuring a Client Port, page 121
Provisioning a Chassis for Optical Shelf, page 122
on Cisco ONS15454 and on Cisco NCS 2000 Series are ons15454.DWDM.K9.R10011.pkg and
NCS2K.L.K9.R10011.pkg respectively.
settings, such as IP address, username, and password.
For more information about the settings, see the
chapter. For information about CTC, see the Cisco Transport Controller chapter in Cisco ONS 15454
Reference Manual.
(NTP) and set the satellite's clock to UTC timezone.
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
5
C H A P T E R
Implementing a Satellite nV System, on page 35
113