Cisco ASR 9000 Series System Configuration Manual page 41

Configuring the Satellite Network Virtualization (nV) System
Parameter
Trunk interfaces, default, native
VLAN, Double Tagged EFPs
VLAN ID range
EFPs matching a single dot1q
VLAN ID
EFPs matching a single dot1ad
VLAN ID
EFPs configured with a dot1q
Tunneling Ethertype 0x9100 or
0x9200
Untagged EFPs
Unprotected satellite access ports
Maximum number of MEPs per
Ethernet Flow Point (EFP)
Maximum number of MEPs per
Satellite
Frames from MEPs that exceed the
limit are not processed either on
the satellite or host, and a warning
is logged.
If an unsupported configuration is committed, the CFM PM processing takes place on the host instead of
Note
the satellite. A warning is issued and it can be viewed in the output of the show ethernet cfm
configuration-errors command.
Related Commands
Refer to the Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component
Command Reference guide for details of these related commands:
• nv satellite sla processing disable
• show ethernet cfm configuration-errors
• show ethernet cfm interfaces statistics
• show ethernet cfm local meps
ASR901
Host
Host
Satellite
Host
Host
Satellite
Satellite
1 - Satellite
More than 1 - Host
Up to 40 - Satellite
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
CFM Performance Monitoring
ASR9000v
Host
Host
Satellite
Host
Host
Satellite
Satellite
1 - Satellite
More than 1 - Host
Up to 44 - Satellite
31