Cisco ASR 9000 Series System Configuration Manual page 15

Configuring the Satellite Network Virtualization (nV) System
Release 5.1.1
Release 5.2.0
Release 5.3.0
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
These features are included on Cisco ASR 9000v
and Cisco ASR 901 satellites:
• Support for Simple Ring Satellite nV topology
was included.
• Support for dual-homed Satellite nV network
architecture was included.
• Support for Layer 2 Fabric network architecture
was included.
• Support for Fabric Ethernet Connectivity Fault
Management (Ethernet CFM) was included.
• Support for 1G ICL on ports 1/45 and 1/46 on
Cisco ASR 9000v satellite was included for all
the Satellite nV topologies by using 1G SFPs.
• Support for these new satellites was included:
◦ Cisco ASR 901 Series Aggregation
Services Router Chassis, Ethernet-only
interfaces, 10 GE, DC power, USB
(A901-6CZ-F-D)
◦ Cisco ASR 901 Series Aggregation
Services Router Chassis, Ethernet and
TDM interfaces, 10 GE, DC power, USB
(A901-6CZ-FT-D)
◦ Cisco ASR 901 Series Aggregation
Services Router Chassis, Ethernet-only
interfaces, 10 GE, AC power, USB
(A901-6CZ-F-A)
◦ Cisco ASR 901 Series Aggregation
Services Router Chassis, Ethernet and
TDM interfaces, 10 GE, AC power, USB
(A901-6CZ-FT-A)
• Support for QoS Offload over Satellite was
supported. See Cisco ASR 9000 Series
Aggregation Services Router QoS
Configuration Guide for more details.
• Support for SyncE in Satellite nV System was
included.
• Support for new SFPs was included.
• Support for Cisco ASR 903 Router as satellite
is removed
5