Usb Pcb Assembly And Y-Area Sensor Assembly Removal - Brother PR600 Service Manual

Main unit
2

USB PCB assembly and Y-area sensor assembly removal

1. Remove the 2 screws 1 and the 2 cord clamps (NK-6N), and then remove
the USB PCB's lead wire and the Y-area sensor's lead wire from the base
frame.
2. Remove the 2 screws 2, and then remove the Y-area sensor assembly.
3. Remove the 2 screws 3, and then remove the USB PCB holder assembly.
4. Remove the 2 screws 4, and then remove the USB PCB cover from the
USB PCB holder assembly.
5. Remove the 2 screws 5, and then remove the USB PCB assembly from
the USB PCB holder.
Power unit
1
2
3
4 5
2 - 57