Upper Thread Eyelet Base Removal - Brother PR600 Service Manual

Main unit
5

Upper thread eyelet base removal

1. Remove the tension axis cap 1. (6 locations)
2. Loosen the thread guide tension screw 2, and remove the nut (2, M3).
Then remove the thread guide tension plate, spring
eyelet base. (6 locations)
6
Antenna assembly removal
1. Remove the 4 screws 1, and then remove the antenna assembly from the
thread stand base assembly.
Thread tension unit
, and upper thread
S53
1
2
S53
1 1
2 - 67