Connect Pcb Final Assembly - Brother PR600 Service Manual

Main unit
1

Connect PCB final assembly

1. Bend the FFC (SML2CD-Y) 90 degrees at a point 55 mm from the tip.
2. Attach the sheet 2 and the FFC (SML2CD-Y) 3 to the PCB holder 1
with the screw 1.
3. Attach the connect PCB assembly 4 to the PCB holder assembly with the
screw 2.
4. Connect the FFC (SML2CD-Y) to the connect PCB assembly, and then
lock the connector.
1
2
Feed unit
Screw, Bind
0.59 – 0.78 N-m
M3X4
Color; Silver
Screw, Pan (S/P washer)
0.59 – 0.78 N-m
M3X6
Color; Silver
1
Torque
Torque
4
1 3
2
2
3 - 75