Lcd Removal; Touch Panel Removal - Brother PR600 Service Manual

Main unit
9

LCD removal

1. Disconnect the inverter lead wire 1 from the inverter (IM4302).
2. Remove the 2 screws 1, and then remove the inverter (IM4302) from the
operation panel A.
3. Remove the lead wire (LCDM8M64) 2 from the inverter (IM4302).
4. Remove the 4 screws 2, and then remove the LCDM (LM8M64) 3.
5. Unlock the LCDM's (LM8M64) connector 4, and disconnect the LCD
cable from the LCDM (LM8M64).
10

Touch panel removal

1. Remove the touch panel (EMU601A2B040) 1 from the operation panel A.
Operation panel
2 1 2
1 3
2
4
1
2 - 79