Antenna Assembly (Step 1); Antenna Assembly (Step 2) - Brother PR600 Service Manual

Main unit
6

Antenna assembly (Step 1)

1. Attach the retaining ring E5 to the antenna shaft 1.
2. Attach the antenna C assembly 3 to antenna D 2, thread the antenna shaft
assembly through them, and then attach the retaining ring E5
3. Secure the antenna C assembly with the screws (1 2).
1
2
7

Antenna assembly (Step 2)

1. Attach pipe bush A 2 to antenna E 1, and then attach the O-ring (P5) 3
to the tip of pipe bush A. (6 locations)
*Key point
• Turn pipe bush A 90 degrees after it has been attached to
antenna E.
2. Attach the 2 antennas A 4, 2 antennas B 5, and the antenna E assembly
to the antenna C assembly with the 4 screws 1.
*Key point
• Tighten the antenna E assembly together with antenna A.
1
Thread tension unit
Screw, Pan (S/P washer)
1.18 – 1.57 N-m
M4X8DB
Color; Silver
Screw, Bind
1.18 – 1.57 N-m
M4X6
Color; Silver
Screw, Bind
0.78 – 1.18 N-m
M3X6
Color; Silver
Retaining rings CS5
Torque
Torque
4
Torque
5
1
3 2
2 1
1 2
3
1 4
1 5
3 - 17