Movable Knife Origin Adjustment - Brother PR600 Service Manual

Adjustment
1. Enter the test mode, and press [MAIN BOARD TEST MODE] and then [TRIM MOTOR TEST].
2. Press [MOVE ORIGIN POSITION] to move the needle plate base assembly's movable knife to its origin.
3. Loosen the 2 screws 1 .
4. Adjust the position the movable knife stops.
5. Tighten the 2 screws 1 .
Distance between edges of movable knife and
fixed knife
1

Movable knife origin adjustment

Screw, Bind
M3X4
Color; Silver
0 mm
0 mm
Torque
0.78 - 1.18 N-m
1
4 - 31