Cold Booting The Ck30 - Intermec CK30 User Manual

To warm boot the CK30
• Press and hold I for 5 seconds. The CK30 tells you it is
performing a warm boot and the screen comes back up to the
start screen.

Cold Booting the CK30

If the CK30 or application is locked up and does not respond to
a warm boot, follow this procedure to perform a cold boot.
When you perform a cold boot, all data in your RAM storage is
deleted. To make a backup copy of everything in your RAM-
based storage system, see "Backing Up Your Files" on page 100.
To cold boot the CK30
Remove the battery.
1
Using a small pointed object (such as the end of a paper clip
2
or pen), press the reset switch on the backside of the CK30.
Do not use force or a sharp object when pressing the reset
switch. You may damage the reset switch.
Replace the battery.
3
CK30 Handheld Computer User's Manual
Chapter 6 — Troubleshooting and Maintaining the CK30
Reset
switch
137