Intermec CK30 User Manual page 88

Chapter 2 — Configuring the CK30
IPSec supports the following settings:
• Public key certificates
• Pre-shared keys
Note: If you want to use L2TP and IPSec, they must be
supported by the corporate server.
To configure a VPN
1 From the Configuration Utility, select Communications >
VPN.
2 Select Create New VPN.
3 Select VPN Name, type a VPN name, and then press Enter.
4 Select VPN Type, choose PPTP or P2TP, and then press
Enter.
5 Select Host Name, type a host name, and then press Enter.
6 Select Create the new VPN. A message box appears to tell
you that your new VPN has been created.
7 Press Enter.
8 Select View/Edit VPN.
9 Select TCP/IP Settings and make the settings match those of
your remote server.
10 Select Security and make the settings match those of your
remote server.
11 If you are using L2TP, select IPSEC Setting and make the
settings match those of your remote server.
12 Select Connect Current VPN.
13 Exit the Configuration Utility.
74 CK30 Handheld Computer User's Manual