Intermec CK30 User Manual page 94

Chapter 3 — Developing and Installing Applications
3 From the IE Browser menu, select Pass Function Keys to
Browser.
4 In the Pass Function Keys to Browser dialog box, select
Function Keys to HTML and press Enter.
Setting the URLs for the Function Keys
You can program all of the available function keys on the CK30
to launch a URL. You can also control whether the URLs will
have open or restricted access.
To set the URLs for the function keys
1 From the Configuration Utility main menu, select Device
Settings > IE Browser > Set URL's for F1-F5.
You can select to set the URLs for F1-F5, F6-F10, F11-F15,
F16-F20, or F21-F24. This procedure uses F1-F5 as an
example.
2 Select F1 URL.
3 In the F1 URL dialog box, enter the URL you want to
correspond to the F1 key and press Enter.
4 (Optional) If you want to restrict access to the URL, select F1
Access to bring up the F1 Access dialog box.
5 (Optional) In the F1 Access dialog box, select Restricted
Access and press Enter.
6 Complete Steps 1 through 5 as many times as necessary to
program all of the function keys you need.
Programming the Function Keys to Go to a URL
If you want your function keys to open URLs when you press
them, you need to program IE Browser to recognize that it
should open a URL when you select a function key.
To program function keys to go to a URL
1 From the Configuration Utility main menu, select Device
Settings > IE Browser > Use F1-F5 as URL Key.
2 In the Use F1-F5 as URL Keys dialog box, select URL
Shortcuts and press Enter.
80 CK30 Handheld Computer User's Manual