Intermec CK30 User Manual page 53

Restoring Default Settings
You can restore the CK30 to factory default settings from the
Configuration Utility. For a complete list of the default settings,
see "Default Configuration Settings" on page 154.
Note: Using the Restore Defaults option resets all network
parameters. As a result, you may lose network communications.
This option should only be used by network administrators or
by Intermec support personnel.
To restore factory default settings
1 From the Configuration Utility menu, select Restore
Defaults.
2 Press Enter to select Restore Defaults. The following Restore
Defaults dialog box appears.
3 Press Enter to restore factory defaults.
Your CK30 performs a cold boot and returns all of your
settings to the factory default settings.
4 If you have CAB files loaded on your CK30, you will see a
Confirm File Replace dialog box. Select Yes to All and then
press Enter. The CK30 installs your CAB files.
When the CK30 is done booting, the Start Screen or the
Setup Assistant appears depending on your settings.
Note: You may need to reinstall some applications after
restoring the default settings because any settings that were
modified for your application will be reset.
CK30 Handheld Computer User's Manual
Chapter 2 — Configuring the CK30
39