Intermec CK30 User Manual page 86

Chapter 2 — Configuring the CK30
15 Press Enter to close the Success message box.
16 Configure your CK30 for WPA, WPA2, or 802.1x security.
To load multiple certificates
1 Create the \Temp\Root and the \Temp\User folders on the
CK30.
2 Copy at least one root certificate .cer file into the
\Temp\Root folder.
3 Copy at least one user certificate .cer file and key .pvk file into
the \Temp\User folder. Each pair of filenames must match
(for example, cert1.cer and cert1.pvk).
4 From the Configuration Utility, select Communications >
802.11 Radio > Certificates. The Certificates screen appears.
Note: The Import Root Certificate and Import User
Certificate functions are also available in Intermec Settings.
5 Select Import Root Certificates. The Import Root Certific
screen appears. Press U to select True and press Enter to save
the change. You return to the Certificates screen.
6 Select Import User Certificates. The Import User Certific
screen appears. Press U to select True and press Enter to save
the change. You return to the Certificates screen.
7 Press F3 to immediately import the certificates:
• All root certificates in \Temp\Root are imported into the
72
Trusted Authorities certificate store.
Note: You are prompted when a root certificate is
imported, unless that certificate is already in the store.
CK30 Handheld Computer User's Manual