Intermec CK30 User Manual page 64

Chapter 2 — Configuring the CK30
The easiest way to configure the network parameters on the
CK30 is to use the Configuration Utility. For help, see
"Configuring the CK30 With the Configuration Utility" on
page 36.
Configuring the Network Parameters for a UDP Plus Network
In a UDP Plus network, the CK30 communicates with a host
computer through the Intermec Application Server.
CK30s in a UDP Plus Network
50
Host
Ethernet
Intermec Application Server
CK30 Handheld Computer User's Manual
UDP Plus
Access point
CK30s