Upgrading Your Ck30 Using Smartsystems Console - Intermec CK30 User Manual

5 If you are using an SD card reader, insert the SD card into
the CK30.
6 Perform a cold boot on the CK30. For help, see "Cold
Booting the CK30" on page 137.
Note: Make sure the CK30 has completely loaded all of the
upgrade files before you remove the SD card.

Upgrading Your CK30 Using SmartSystems Console

You can use the SmartSystems Console to upgrade the operating
system on your CK30. The console is part of SmartSystems
Foundation.
Before you can upgrade your computer, you need:
• SmartSystems Foundation. To download SmartSystems
Foundation, go to www.intermec.com/SmartSystems.
• the device upgrade .exe file. This file is available from the
Intermec web site at www.intermec.com. Go to Service &
Support > Downloads. Make sure the file you select is for
your language.
To upgrade a CK30 using SmartSystems Console
1 Install SmartSystems Foundation on your desktop PC and
open the console.
2 Make sure the console and the CK30s are on the same
subnet.
3 Make sure your CK30s are either in a communications dock
or charging dock or that power management is disabled.
4 Download the device upgrade .exe file to your desktop PC.
5 Double-click the .exe file on your desktop PC. An
InstallShield application starts and walks you through the
process of extracting the upgrade files in the default location.
Note: Do not change the default location where InstallShield
extracts the files. SmartSystems Console requires that the files
be located in the default directory.
CK30 Handheld Computer User's Manual
Chapter 4 — Managing the CK30
103