Launching Your Application Automatically; Customizing How Applications Load On The Ck30 - Intermec CK30 User Manual

To use SmartSystems Console to install an application
1 Download your application file from the Intermec web site
and unzip it on your desktop.
2 Double-click the application file to install it. The application
file should appear in the software vault.
3 From the SmartSystems Console in the software vault, drag-
and-drop the application onto each CK30 discovered in your
network.
For more information on using the SmartSystems Console, see
the online help.

Launching Your Application Automatically

To launch your application automatically on the CK30 every
time you perform a warm or cold boot, make sure your CAB file
places a shortcut to your application in the \Windows\StartUp
folder.

Customizing How Applications Load on the CK30

If you have several processes that you need to have run in a
specific order as the CK30 turns on, you can use the AutoRun
system to customize the way applications load. For compatibility
with other Intermec computers, you can place a copy of
AutoRun.exe in the same folder as your AutoRun.dat file but it
is not required.
To create and install the AutoRun.dat file on your CK30
1 On the CK30, create a subfolder called 2577 on the
SDMMC Disk or the CK_FFS folder.
2 On your PC, open Notepad.
3 Write commands for AutoRun.dat using these supported
script commands:
CK30 Handheld Computer User's Manual
Chapter 3 — Developing and Installing Applications
89