Intermec CK30 User Manual page 159

Appendix A — Specifications
AD1 Communications Dock (P/N 225-709-xxx)
Use the AD1 to charge your AB1G battery and provide power to
your CK30 while still having the ability to communicate via a
serial, Ethernet, or USB port.
AD2 4-Bay Communications Dock (P/N 225-710-xxx)
Use the AD2 to hold up to four CK30s with a battery installed.
The AD2 dock charges the batteries, provides power to the
computer, provides one Ethernet connector, and provides a
serial port for each inserted CK30.
AG1 Protective Case
The protective case provides a clear vinyl covering to protect the
screen and keypad area.
AG2 Protective Boot
The protective boot provides additional ruggedness for the
CK30.
CK30 and CK31 Handle (P/N 203-754-xxx)
The handle works with all models of the CK30 and CK31 and
provides a convenient scanning trigger..
AL1 Holster and Belt
The holster and belt provide an easy way for you to carry the
CK30 while not using it. The holster and belt support either
right or left-handed use and you can use it to carry a CK30 with
or without a handle. You can only use this accessory with a
CK30 that has either the 1D linear imager or the 2D imager.
AL2 Handstrap
The removable and adjustable handstrap make it easy for you to
hold and use the CK30 without tiring your hand.
AL3 Swiveling Belt Clip
Use the swiveling belt clip to store your CK30 while not in use.
Once you have attached the belt clip, it is easy to insert and
remove the CK30 as necessary.
CK30 Handheld Computer User's Manual 145