Intermec CK30 User Manual page 57

To set up the host computer
• Verify that the host computer can communicate with the
Intermec Application Server.
To set up the application
• Prepare and write a host application that can communicate
with the Intermec Application Server and send transactions to
and receive transactions from the CK30 in this format:
where:
transaction
header
TMF field
commands
CK30 Handheld Computer User's Manual
transaction header
is a 96-byte field containing the message
number, date and time, source application ID,
destinations application ID, transaction ID,
and other information. You must set the system
message (SYS$MSG) flag to E in the
transaction header. For help, see the Intermec
Application Server user's manual.
is a 2-byte field containing one of these values:
CG Configuration Get request sent from the
host application.
Cg Configuration Get response sent from
the CK30 to the host.
CS Configuration Set request sent from the
host application.
Cs Configuration Set response sent from
the CK30 to the host.
are the reader and configuration commands
that you want to set on the CK30 or the
current value you want to retrieve from the
CK30. To save configuration changes in flash
memory, send the reader command .+1 as the
last command.
For a list of all supported commands, see the
Intermec Computer Command Reference Manual.
Chapter 2 — Configuring the CK30
TMF field commands
43