Intermec CK30 User Manual page 44

Chapter 1 — Using the CK30 Handheld Computer
3 Gently insert the SD card into the CK30 with the printed
side facing the keypad and screen side of the CK30.
4 Push the card into the slot until it latches in place and the
steel card retainer covers the end of the SD card.
5 To verify that the SD card is seated correctly, press I to turn
on the CK30.
• If the SD card is bootable, the CK30 should boot from the
• You should be able to navigate to the SDMMC Disk
6 Replace the door, making sure to insert the door catch into
the slot above the steel card retainer.
7 Replace the two screws.
8 Press I to turn on the CK30.
9 (Optional) Navigate to the SDMMC Disk folder to see the
contents of the SD card.
30
CK30
SD card
retainer
SD card
card. If not, see page 127 for troubleshooting help.
folder to see the contents of the SD card. If not, see page
127 for troubleshooting help.
SD card
Door
retainer
catch
CK30 Handheld Computer User's Manual
Door
Screw
(2 places)