Resetting The Ck3; Warm Booting The Ck3; Cold Booting The Ck3 - Intermec CK3a User Manual

Resetting the CK3

Warm Booting the CK3

Cold Booting the CK3

CK3 Mobile Computer User's Manual
You seldom need to reset the CK3. However, you do need to reset the
CK3 when an application is locked up and does not respond, when
you upgrade the firmware, or when you reflash the CK3. The CK3
uses the configuration currently saved in flash memory during the
reset process.
There are three ways to reset the CK3:
• Warm boot
• Cold boot
Clean boot
•
If your CK3 has a charged battery installed but does not resume after
you press the Power key, or if the computer or an application is locked
up, you may need to warm boot the CK3.
To warm boot your CK3
• Press and hold
Or,
• From the SmartSystems console, right-click the CK3 and select
Intermec Power Tools > Warm Boot Device.
The CK3 shuts down, restarts, and goes through the initialization
process.
If the CK3 or application is locked up and does not respond to a warm
boot, follow this procedure to perform a cold boot.
Performing a cold boot may result in data loss. When you
cold boot the CK3, cached disk data may not be saved, so
transactional data may be lost.
Chapter 4 — Troubleshooting and Maintaining the CK3
for 5 seconds.
77