Upgrading Your Ck31 Using Smartsystems Console - Intermec CK31 User Manual

If you have SmartSystems Console installed, the default
location the files are extracted to is:
Program files\Intermec\SmartSystem\Ss_Lib\Software\ CK3x
OS vx.xx.xx.xxxx
where
x.xx.xx.xxxx is the operating system upgrade version.
3 If you are using an SD card reader, remove the SD card from
the CK31 and place it in the reader.
4 Copy all of the files in Program Files\Intermec\CK3x OS
vx.xx.xx.xxxx to your SD card.
If you are using ActiveSync or an FTP server to copy the files
to your CK31, place the files in the SDMMC Disk folder.
5 If you are using an SD card reader, insert the SD card into
the CK31.
Note: Make sure the CK31 has completely loaded all of the
upgrade files before you remove the SD card, warm boot, or
cold boot the computer.
6 Perform a cold boot on the CK31. For help, see "Cold
Booting the CK31" on page 105.

Upgrading Your CK31 Using SmartSystems Console

You can use the SmartSystems Console to upgrade the operating
system on your CK31. The console is part of SmartSystems
Foundation and is available from the Intermec web site for the
Intermec Developer Library.
Before you can upgrade your computer, you need:
• SmartSystems Foundation. To download SmartSystems
Foundation, go to www.intermec.com/idl and open the
Device Management page.
• the device upgrade .exe file. This file is available from the
Intermec web site at www.intermec.com. Go to Service &
Support > Downloads. Make sure the file you select is for
your language.
CK31 Handheld Computer User's Manual
Chapter 3 — Developing and Installing Applications
79