Power Management; Filter Counter - Eiki EK-120UK Owner's Manual

Power management

For reducing power consumption as well as
maintaining the lamp life, the Power management
function turns off the projection lamp when the
projector is not operated for a certain period. Select
one of the following options:
Ready
When the lamp has been fully cooled down, the
POWER indicator changes to green blinking. In this
condition, the projection lamp will be turned on if
the input signal is reconnected or any button on the
remote control or top control is pressed.
Power off
When the lamp has been fully cooled down, the
power will be turned off.
Off
Power management function is off.
Timer
If the input signal is interrupted and no button is
pressed for more than 30 seconds, the timer display
with No signal appears. It starts the countdown until
the lamp is turned off. Press  button to set the
Timer(1~30min.)
Ready countdown
Set the time that ready status transfers to standby
status automatically.(0-30min. 0 Min: not transfer
automatically)
In ready status, press POWER button to switch to
standby status, and press any other button to turn on
the projector.

Filter counter

This function is used to set a frequency for filter
cleaning.
When the projector reached a specified time
between cleanings, a Filter warning icon
appears on the screen, notifying the cleaning
is necessary. After cleaning the filter, be sure
to select RESET and set the timer. The Filter
warning icon will not turn off until the filter
counter is reset.
Filter counter
Display the using time of the filter.
Timer
Set the time to displaythe warning icon.
Select Timer from OFF/100/200/300.
Filter counter reset
Reset the filter counter.(See page 65)
Expand
Power management
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
Note:
Factory default: "Timer: 5 min",
"Ready countdown: 5 min".
Filter counter
Expend
No signal
01 : 20
Time left before Lamp is off.
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
47