Power Management; Filter Counter - Eiki EK-351WST Owner's Manual

Power management

For reducing power consumption as well as
maintaining the LED light source life, the Power
management function turns off the projection LED
light source when the projector is not operated for a
certain period. Select one of the following options:
Ready
When the LED light source has been fully cooled
down, the POWER indicator changes to green
blinking. In this condition, the projection LED
light source will be turned on if the input signal is
reconnected or any button on the remote control or
control panel is pressed.
Shut down
When the LED light source has been fully cooled
down, the power will be turned off.
Off
Disable the Power management function.
Timer
If the input signal is interrupted and no button is
pressed for more than 30 seconds, the timer display
with No signal appears. It starts the countdown until
the LED light source is turned off. Press  button
to set the Timer(1~30min.)
Ready countdown
Set the time that ready status transfers to standby
status automatically.(0-30min. 0 Min: not transfer
automatically)
In ready status, press POWER button to switch to
standby status, and press any other button to turn on
the projector.

Filter counter

This function is used to set a frequency for filter
cleaning.
When the projector reached a specified time
between cleanings, a Filter warning icon
appears on the screen, notifying the cleaning
is necessary. After cleaning the filter, be sure
to select RESET and set the timer. The Filter
warning icon will not turn off until the filter
counter is reset.
Filter counter
Display the using time of the filter.
Timer
Set the time to display the warning icon.
Filter counter reset
Reset the filter counter.
48
OSD setting-Expand
Power management
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
No signal
01 :
Time left before LED light source is off.
Note:

Factory default: "Timer: 5 min",
"Ready countdown: 5 min".
Filter counter
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
20