Installing Expansion Cards - Supermicro SUPERSERVER 5028D-TN4T User Manual

SUPERSERVER 5028D-TN4T User's Manual
5-6

Installing Expansion Cards

The SC721 chassis includes one PCI slot for a low profile expansion card. It is in-
stalled by removing the chassis tray that holds the motherboard and rear I/O shield.
Figure 5-14. Removing the Rear Tray from the Chassis
Installing the Expansion Card
1. Power down the system as described in Section 5-1 and remove the chassis
cover.
2. Remove the three screws securing the rear tray to the rear of the chassis and
set them aside for later use.
3. Pull the rear tray out from the chassis.
1
4
5-12