Installing The Internal Fixed Hard Drives - Supermicro SUPERSERVER 5028D-TN4T User Manual

SUPERSERVER 5028D-TN4T User's Manual

Installing the Internal Fixed Hard Drives

The chassis supports two internal 2.5" SATA fixed hard drives, one top mounted
drive and one side mounted drive.
Figure 5-9. Installing the Top Mounted Fixed Hard Drive
Installing the Top Mounted Fixed Hard Drive
1. Power down the system as described in Section 5-1 and remove the chassis
cover.
2. Place the 2.5" hard drive into the hard drive bracket and secure the hard drive
to the bracket with the four screws provided.
3. Place the hard drive and bracket into the top mounting position of the chassis
as illustrated above and secure it to the chassis with two screws.
4. Replace the chassis cover, plug the power cord into the rear of the power supply
and power up the system.
5-8