Table of Contents
Advertisement
SUPERSERVER 5028D-TN4T User's Manual
5-1
Removing Power from the System
Before performing most setup or maintenance tasks, use the following procedure
to ensure that power has been removed from the system.
1. Use the operating system to power down the system, following the on-screen
prompts.
2. After the system has completely shut-down, carefully grasp the head of the
power cord and gently pull it out of the back of the power supply.
3. Disconnect the cord from the power strip or wall outlet.
5-2
Hardware Security
The chassis features multiple locking devices to help deter hardware theft and
protect user data. While no lock is infallible, it is recommended that users keep
their systems locked when not in use.
Front Bezel Lock
The locking front bezel protects against unauthorized removal of the hard drives.
The key to locks or unlocks the bezel. Always remove the key from the lock and
store the key in a secure place.
Figure 5-2. Front Bezel Lock
5-2
Advertisement
Table of Contents
