Removing And Installing Drives; Front Mounted Hot-Swap Drives - Supermicro SUPERSERVER 5028D-TN4T User Manual

5-4

Removing and Installing Drives

Front Mounted Hot-Swap Drives

1
3
Figure 5-6. Removing the Hard Drive Carrier from the Drive Cage
The chassis supports four 3.5" hot-swappable hard drives in hard drive carriers.
These hard drives can be removed from the chassis without powering down the
system.
Removing 3.5" Hot-Swap Hard Drives
1. Unlock the front bezel and swing it open.
2. Press the release tab on the hard drive carrier, this will extend the hard drive
carrier handle.
3. Use the hard drive carrier handle to pull the hard drive out of the chassis.
Chapter 5 Advanced Chassis Setup and Maintenance
5-5