Table of Contents
Advertisement
SUPERSERVER 5028D-TN4T User's Manual
Control Panel Connectors
Power Button
The Power Button connection is
located on pins1 and 2 of JF1.
Momentarily contacting both pins will
power on/off the system. This button
can also be configured to function as
a suspend button (with a setting in the
BIOS--see Chapter 7). To turn off the
power in the suspend mode, press
the button for at least 4 seconds.
Refer to the table on the right for pin
definitions.
Reset Button
The reset button is located on pins
3 and 4 of JF1 and attaches to the
reset switch on the computer chassis.
See the table on the right for pin
definitions.
16
Power On LED
HDD LED
NIC1 LED (Activity)
NIC2 LED (Activity)
OH/Fan Fail/Pwr Fail
X
Ground
Ground
Figure 4-4. Control Panel Header Pins
15
3.3 V
3.3 V stby
3.3 V stby
3.3 V stby
UID LED
3.3 V
Reset (Button)
Power (Button)
2
1
Pin Definitions (JF1)
Pin#
1
2
Pin Definitions (JF1)
Pin#
3
4
4-10
Power Button
Definition
Signal
Ground
Reset Button
Definition
Reset
Ground
Advertisement
Table of Contents
