Document Conventions; Warnings; Site Preparation - Motorola AP-7131N-FGR Installation Manual

2
Motorola Solutions AP-7131N-FGR Access Point Installation Guide

1.1 Document Conventions

The following graphical alerts are used in this document to indicate notable situations:
NOTE
CAUTION
WARNING!

1.2 Warnings

• Read all installation instructions and site survey reports, and verify correct equipment
installation before connecting the access point to its power source.
• Remove jewelry and watches before installing this equipment.
• Verify that the unit is grounded before connecting it to the power source.
• Verify that any device connected to this unit is properly wired and grounded.
• Connect all power cords to a properly wired and grounded electrical circuit.
• Verify that the electrical circuits have appropriate overload protection.
• Attach only approved power cords to the device.
• Verify that the power connector and socket are accessible at all times during the operation
of the equipment.
• Do not work with power circuits in dimly lit spaces.
• Do not install this equipment or work with its power circuits during thunderstorms or other
weather conditions that could cause a power surge.
• Verify there is adequate ventilation around the device, and that ambient temperatures meet
equipment operation specifications.

1.3 Site Preparation

• Consult your site survey and network analysis reports to determine specific equipment
placement, power drops, and so on.
Tips, hints, or special requirements that you should take note of.
Care is required. Disregarding a caution can result in data loss or
equipment malfunction.
Indicates a condition or procedure that could result in personal injury or
equipment damage.