Motorola AP-7131N-FGR Installation Manual page 37

5. Select the Quick Setup screen's
WAN or LAN configuration values. The WAN tab displays by default.
a. Select the Enable WAN Interface
access point and a larger network or outside world through the WAN port. Disable this
option to effectively isolate the access point's WAN connection. No connections to a
larger network or the Internet will be possible. MUs cannot communicate beyond the
configured subnets.
b. Select the This Interface is a DHCP Client
point WAN connection. This is useful, if the target corporate network or Internet Service
Provider (ISP) uses DHCP. DHCP is a protocol that includes mechanisms for IP address
Network Configuration
checkbox to enable a connection between the
checkbox to enable DHCP for the access
Basic Configuration
tab to define a minimum set of
33