Download Print this page

Motorola AP650 Installation Manual: Introduction; Document Conventions; Warnings; Site Preparation

Hide thumbs


Installation Guide


The AP650 access point links wireless 802.11a/b/g/n devices to the controller, enabling growth of your wireless
network with a cost-effective alternative to standard Access Points. The AP650 access point provides two
placement options: wall and ceiling. Wall mount slots fit onto two screws provided. Arrows on the case guide
placement of the screws. For placement above a suspended ceiling, a safety wire tie point on the case provides for
a loop of safety wire. The light pipe fits through a hole in the ceiling tile to provide a view of the unit's status lights.
The AP650 access point receives all power and transfers data through the same CAT-5 or better Ethernet cable.
There is no additional power supply required. An 802.3af Ethernet switch, PoE enabled controller or power injector
is required.
1.1 Document Conventions
The following graphical alerts are used in this document to indicate notable situations:
1.2 Warnings
Read all installation instructions and site survey reports, and verify correct equipment installation before connecting the AP650
Access Point.
Remove jewelry and watches before installing this equipment.
Verify that the unit is grounded before connecting it to the power source.
Verify that any device connected to this unit is properly wired and grounded.
Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications.
1.3 Site Preparation
Consult your site survey and network analysis reports to determine specific equipment placement, power drops, and so on.
Assign installation responsibility to the appropriate personnel.
Identify and document where all installed components are located.
Ensure adequate, dust-free ventilation to all installed equipment.
Identify and prepare Ethernet and console port connections.
Verify that cable lengths are within the maximum allowable distances for optimal signal transmission.
Tips, hints, or special requirements that you should take note of.
Care is required. Disregarding a caution can result in data loss or
equipment malfunction.
Indicates a condition or procedure that could result in personal injury or
equipment damage.


   Also See for Motorola AP650

Comments to this Manuals

Symbols: 0
Latest comments: