Motorola AP-7131N-FGR Installation Manual page 35

3. Refer to the AP-71xx System Settings
a. Assign a System Name
useful if multiple devices are being administered.
b. Select the Country
the correct country code on the first login. A warning message also displays stating an
incorrect country setting may result in illegal radio operation. Selecting the correct
country is central to legally operating the access point. Each country has its own
regulatory restrictions concerning electromagnetic emissions and the maximum RF
signal strength that can be transmitted. To ensure compliance with national and local
laws, set the country accurately. CLI and MIB users cannot configure their access point
until a two character country code (for example, United States - us) is set.
c. Optionally enter the IP address of the server used to provide system time to the access
point within the Time Server field. Once the IP address is entered, the access point's
Network Time Protocol (NTP) functionality is engaged automatically.
field to define the following parameters:
to define a title for this access point. The System Name is
for the AP-7131's country of operation. The access point prompts for
Basic Configuration 31