Download Print this page

Motorola AP 6522M Installation Manual: Introduction; Document Conventions

Hide thumbs


Installation Guide

1 Introduction

The AP 6522M access point, a component of the Motorola Solutions wireless controller system, links wireless
802.11abgn devices to the controller, enabling the growth of your wireless network with a cost effective
alternative to standard access points. The AP 6522M access point provides multiple deployment options.
The AP 6522M access point receives all power and transfers data through the same CAT-5 or better Ethernet
cable. An 802.3af Ethernet switch or power supply (specifically rated for the AP 6522M) is required (Part No.
An AP 6522M model access point uses WiNG 5 software as its onboard operating system. The access point's
unique WiNG 5 software enables the access point to function as either a Virtual Controller AP capable of adopting
and managing up to 24 additional AP 6522M access points, a Standalone access point, or a Dependent mode
access point managed by its connected controller.
If new to Motorola Solutions access point technology, refer to the WiNG Access Point System Reference Guide to
familiarize yourself with access point technology and the feature set supported by the WiNG operating system.
The guide is available, at
The AP 6522M access point is approved under MODEL: AP-0622.
This document is written for the qualified network device installer.

1.1 Document Conventions

The following graphical alerts are used in this document to indicate notable situations:
Tips, hints, or special requirements that you should take note of.
Care is required. Disregarding a caution can result in data loss or
equipment malfunction.
Indicates a condition or procedure that could result in personal injury or
equipment damage.


   Also See for Motorola AP 6522M

Comments to this Manuals

Symbols: 0
Latest comments: