Configuring "Basic" Device Settings - Motorola AP-7131N-FGR Installation Manual

30 Motorola Solutions AP-7131N-FGR Access Point Installation Guide
To contact Motorola Solutions Support in the event of a password reset requirement, go to
https://portal.motorolasolutions.com/Support/US-EN
CAUTION

3.4 Configuring "Basic" Device Settings

Configure a set of minimum required device settings within the
(LAN, WAN etc.) can often be defined in other locations within the menu tree. When you change the
settings in the Quick Setup screen, the values also change within the screen where these parameters
also exist. Additionally, if the values are updated in these other screens, the values initially set within
the Quick Setup screen will be updated.
NOTE
To define a basic access point configuration:
1. Select System Configuration
screen is not already displayed.
2. Select the
radio configuration.
NOTE
Only a qualified installation professional should set or restore the
access point's radio and power management configuration in the
event of a password reset.
Beginning with the 4.0 release of the access point firmware, a new
scheme for radio configuration and WIPS server management has been
implemented within the Quick Setup GUI applet. These radio buttons
define how WLAN and sensor functionality are supported amongst the
radios available to the access point. The options available depend on the
SKU supported (and are described within this section).
->
System Configuration
Beginning with the 4.0 release of the access point firmware, sensor
functionality is no longer configured within a designated WIPS screen.
The WIPS Server designation and radio configuration is now defined as
part of the access point's quick setup. For a description of sensor
functionality and how it relates to access point operation, refer to the
AP-7131N-FGR Access Point Product Reference Guide available at
https://portal.motorolasolutions.com/Support/US-EN
Quick Setup
Quick Setup from the menu tree, if the Quick Setup
tab to define the access point's system, WIPS server and
screen. The values