Configuring The Access Point - Motorola AP-7131N-FGR Installation Manual

3.1.2 Accessing the AP-7131N-FGR Using Mozilla Firefox
To define the browser settings needed to access the AP-7131N-FGR using Mozilla Firefox:
1. Open the Mozilla Firefox browser and open the
2. Select the Advanced
depending on the version of Firefox used).
3. Within the Protocols field, ensure the
AP-7131N-FGR does not support SSL 2.0 or SSL 3.0.
A Website Certified by an Unknown Authority
to define a trusted site.
4. Select either the
temporarily for this
A Security Error: Domain Name Mismatch
At this point in the browser configuration, a screen displays stating the Web site's certificate
cannot be verified.
5. Click Yes to continue. The access point's login screen displays.
6. Log in using
default login is successful, the
immediately change the password for security. For more information, see Configuring the
Access Point on page 27.

3.2 Configuring the Access Point

For the basic setup described in this section, the Java-based Web UI will be used to configure the
access point.To access the access point via the GE1/POE port, the GE1/POE port is statically assigned
default IP address of 192.168.0.1/24. The default WAN IP address for GE2 port is set to 10.1.1.1. For
this example, the access point's LAN interface (GE1 port) will be used to connect to the access
point.For optimal viewing of the Web UI, the screen resolution should be set to 1024 x 768 pixels or
greater.
Remember, Internet Explorer and Mozilla Firefox require unique settings be defined in order for the
browser to access the AP-7131N-FGR GUI applet. For instructions on configuring these browser
settings, see Configuring Your Browser for AP-7131N-FGR Support on page 26.
tab, then select either the
Accept this certificate permanently
session. Click the
admin as the default User ID and
Change Admin Password
Tools > Options
Encryption
Use TLS 1.0 option is selected. Remember, the
screen displays stating Firefox is unable
or
OK button to continue.
screen could display. Click
motorola as the default password. If the
Basic Configuration
menu.
or Security tab (they differ
Accept this certificate
OK to continue.
window displays. You need to
27