Motorola AP-7131N-FGR Installation Manual page 36

32 Motorola Solutions AP-7131N-FGR Access Point Installation Guide
d. Define a primary and alternate WIPS server IP Address for WIPS Server 1 and 2. These
are the addresses of the primary and secondary WIPS console server. WIPS support
requires a Motorola Solutions AirDefense WIPS Server on the network. WIPS
functionality is not provided by the access point alone. The access point works in
conjunction with the dedicated WIPS server(s).
NOTE
4. Refer to the new
by the access point's radio(s).
A dual radio AP-7131N-FGR access point displays 7 configuration options. Refer to the
following table for the options available to AP-7131N-FGR models.
2.4 GHz WLAN,
& Sensor
5.0 GHz WLAN
& Sensor
2.4 GHz WLAN &
5.0 GHz WLAN only -
no Sensor
Sensor only Spectrum Analysis mode
(no WLAN)
2.4 GHz WLAN -
no Sensor
5.0 GHz WLAN -
no Sensor
Radios Off
CAUTION
The System Name and Country are also configurable within the
Settings screen. Refer to the AP-7131 Series Product Reference Guide to
optionally set a system location and admin email address for the access
point or to change other default settings.
Radio Configuration
Radio Button
Only a qualified installation professional should set the access point's
radio and power management configuration.
field to define how WLAN and WIPS are supported
AP-7131N-FGR Dual Radio SKU
Radio1 WLAN,
Radio 2 WIPS
Radio 1 WIPS,
Radio 2 WLAN
Radio 1 WLAN,
Radio 2 WLAN
Radio 1 WIPS,
Radio 2 WIPS
Radio1 WLAN,
Radio 2 Disabled
Radio1 Disabled,
Radio 2 WLAN
Radios 1 and 2 Disabled
System