Where To Go From Here - Motorola AP-7131N-FGR Installation Manual

1. Login to the AP using the default username 'admin' and default password 'motorola'.
2. Execute the command '
On confirming 'yes' , AP will reboot and come up with default factory configuration.
This step is required as the earlier FIPS configuration is non-compliant with Common Criteria
specification.
3. Login to the AP using the default username 'admin' and default password 'motorola'. You
will be asked to change your password.
4. To import the previously exported configuration, go to
context and execute the command
Verify the device is working as expected after successfully importing the configuration. Make sure
you delete the earlier exported configuration file from the SFTP (backup) server for security reason.
NOTE

3.6 Where to Go From Here?

Once basic connectivity has been verified, the access point can be fully configured to meet the needs
of the network and the users it supports. To put the access point into the Common Criteria certified
configuration, follow the procedures in the Motorola Solutions AP7131N-GR Common Criteria
Supplement. This supplement is available on the Motorola Solutions Web site, at
https://portal.motorolasolutions.com/Support/US-EN
170133-01. The Common Criteria Supplement will also refer to the AP-7131N-FGR Access Point
Product Reference Guide. The Common Criteria version of the Product Reference Guide is also
available on the Motorola Solutions Web site, search for manual number 72E-161311-01.
admin(system.config)>default
'imp-prior-cfg'
Whenever an AP7131-GR is upgraded with 4.0.4.0 firmware version
image, the 'admin' user must enter the default password to login to the
device again.
'.
admin(system.config)
. Once on the web site, search for manual 72E-
Basic Configuration 43