Configuring Smart Card Authentication Settings - Xerox WorkCentre 4265 System Administrator Manual

Configuring Smart Card Authentication Settings

When Smart Card authentication is configured, users swipe a pre-programmed identification card at the
control panel. Purchase and install a Smart Card reading system before configuring Smart Card
authentication.
To configure access rights using Smart Card authentication:
In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.
1.
2. Click Login Methods.
To require users to swipe a pre-programmed identification card at the control panel, select Smart
3.
Card (CAC/PV).
4. To configure each feature, click the Pencil icon.
5. To configure the Log Out Confirmation Screen, select an option.
The Login Methods page in CentreWare Internet Services provides links to authentication and
personalization configuration settings.
In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.
1.
2. Click Login Methods.
See also:
Setting the Login Method
Configuring LDAP Servers
Setting Up Authentication for a Smart Card System
Adding a Domain Controller
1. In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.
Click Login Methods.
2.
3. For Domain Controllers, click the Pencil icon. The domain controller server must validate the domain
certificate on the smart card of the user before the user can access the printer.
4. For PIV Auth Mode, select an option.
5. Click Add New CAC Server.
6. For Domain Controller Type, select an option.
7. Type the domain controller server address information.
Click Save.
8.
on page 51
® ®
Xerox WorkCentre 4265 Multifunction Printer
System Administrator Guide
Security
55