Configuring Convenience Authentication Settings - Xerox WorkCentre 4265 System Administrator Manual

Multifunction printer
Hide thumbs Also See for WorkCentre 4265:
Table of Contents

Advertisement

Security
Configuring Authentication Server Settings for LDAP
The printer uses the primary LDAP server for authentication, authorization, and personalization. The
primary LDAP server is the server that appears at the top of the LDAP server list on the LDAP Server page
in CentreWare Internet Services. If you already have configured LDAP server settings, the printer uses
this server automatically when you select LDAP as the network authentication or authorization method.
The printer only uses alternate LDAP servers for authorization and personalization when primary LDAP
server communication fails.
In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.
1.
2.
Click Login Methods.
3.
For Authentication Server, click the Pencil icon.
4.
For Authentication Protocol, select LDAP.
5.
To configure the LDAP Server, click the Pencil icon.
6.
Click Save.

Configuring Convenience Authentication Settings

When Convenience Authentication is enabled, users swipe a pre-programmed identification card
through a proximity card reader at the control panel. To use this method, purchase and install a USB
card reader and an authentication server that supports the Xerox
To configure access rights using Convenience Authentication:
1.
In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.
Click Login Methods.
2.
3.
To require users to swipe a pre-programmed identification card through a proximity card reader at
the control panel, select Convenience. To use Convenience login, purchase and install a USB card
reader and an authentication server that supports the Xerox
To allow an alternate login method, select User can login at device if card is not available.
4.
5.
To configure each feature, click the Pencil icon.
6.
To configure the Log Out Confirmation Screen, select an option.
Configuring an Authentication Server for Convenience Authentication
In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.
1.
2.
Click Login Methods.
Set the login method to Convenience authentication.
3.
4.
For Convenience Authorization Setup, click the Pencil icon.
5.
For Accounting Code Access, select an option.
6.
Under Server Communication, select an address type. Type the appropriately formatted address or
host name of your server and change the default port number as needed.
7.
For Path, type the HTTP path that your authentication server provides.
8.
When Network Accounting is configured, the printer can obtain user accounting information from
the authentication server. To reduce the number of screens that appear when a user logs in at the
control panel, select Automatically apply Accounting Codes from the server.
Click Save.
9.
®
54
Xerox
WorkCentre
System Administrator Guide
®
4265 Multifunction Printer
®
Convenience Authentication API.
®
Convenience Authentication API.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents