Initial Setup At The Control Panel - Xerox WorkCentre 4265 System Administrator Manual

Initial Setup at the Control Panel

Installation Wizard
The Installation wizard starts the first time you turn on the printer. The wizard prompts you with a series
of questions to help you configure basic printer settings.
Note: You can change these settings at any time.
For details, see the User Guide for your printer.
Setting Altitude Adjustment
Atmospheric pressure, determined by altitude, can affect print quality. If the printer is located at an
elevation greater than 8000 feet or 2436 meters, to improve print quality, you can use Altitude
Adjustment.
To set Altitude Adjustment:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Device Settings > General > Altitude Adjustment.
Touch On, then touch OK.
3.
® ®
Xerox WorkCentre 4265 Multifunction Printer
System Administrator Guide
Initial Setup
17