Setting The Login Method - Xerox WorkCentre 4265 System Administrator Manual

Setting the Login Method

In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.
1.
Click Login Methods.
2.
3. To set the authentication method used to log in to the control panel, select an option.
Passcode: Panel lock requires users to enter a passcode.
−
− Local: User login information is stored on the printer in the User Information Database.
Network: User login information is stored externally in a network database, such as an LDAP
−
directory.
− Convenience: This method requires users to swipe a pre-programed identification card through
a proximity card reader at the control panel. This method requires a USB card reader and an
authentication server that supports the Xerox
− Smart Card: This authentication method requires users to swipe a pre-programed identification
card at the control panel. This method requires a Smart Card reading system.
4. If you select Convenience or Smart Card as the authentication method, you can configure the
printer to allow users to log in at the control panel. For Alternate AlternateTouch UI Method, select
User can login at device if card is not available. This option is useful if a user loses their smart card
but must access the printer.
5. If you select Passcode, click Apply.
®
Convenience Authentication API.
® ®
Xerox WorkCentre 4265 Multifunction Printer
System Administrator Guide
Security
51